Hyundai Venue Forum banner

LED Swap

2425 Views 4 Replies 2 Participants Last post by  kpayton
Changed out my License Plate Lights to White LED today as well as the two side markers up front.

Used this Kit from Amazon (For those who don't want to wait for their shipment across the pond :) )


I haven't gone after the interior map lights or the dome light yet because I don't want to scratch up the plastic pieces.

The question I have is - Id like to change out the signal bulbs on the rear as well as the front. Can someone tell me what bulb type that is? Id like to avoid the "Ricer" flash if possible and to not have to wire in resisters. Id also like to do reverse lamps eventually too.

Ill get pictures when the yellow thing in the sky goes down :)
1 - 5 of 5 Posts
I have replaced all the interior lights, including the trunk light to LED on my 2022 SEL (USA). I also replaced the rear signal lights to LED with the Oxilam error free bulbs from Amazon.
I have replaced all the interior lights, including the trunk light to LED on my 2022 SEL (USA). I also replaced the rear signal lights to LED with the Oxilam error free bulbs from Amazon.
did you replace your reverse lights yet? I have signals on the front and rears and reverse and a dome light left todo. I was going to do thevisor mirrors too but honestly very low priority. Really want the exterior done asap
did you replace your reverse lights yet? I have signals on the front and rears and reverse and a dome light left todo. I was going to do thevisor mirrors too but honestly very low priority. Really want the exterior done asap
I have the bulbs for the reverse lights but I chickened out. It seems like it’s going to be a big job. Let me know how it’s done if you do your reverse lights.
I did not replace the front signal lights because they are the double filament type and I can’t find a error free replacement for amber double contacts. Where did you buy your front signal bulbs.
Automotive lighting Automotive tire Gas Automotive exhaust Machine
See less See more
I have the bulbs for the reverse lights but I chickened out. It seems like it’s going to be a big job. Let me know how it’s done if you do your reverse lights.
I did not replace the front signal lights because they are the double filament type and I can’t find a error free replacement for amber double contacts. Where did you buy your front signal bulbs. View attachment 1253
Haven’t bought the front signal bulbs. I did the side ones in white. I really wanted the fronts to match and I want to take the bulb out the front corners since the lens is orange I can’t change it to white.

I didn’t realize the reverse lamps were so hard to get to. I thought you would have to go from top or bottom or is it a pull the lens out from the exterior? Also didn’t realize the front signals were dual filament. I have so much to learn on this car lol. I def want to avoid the “ricer flash”.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top