[Seasameseed]

Hi everyone, this is my new 2022 Venue Ultimate, I got it in June of 2022. I’m new to this community and I do have a lot to look through, but I’m looking for recommendations from other Venue drivers on any sort of modifications (aesthetic, or performance). I’m very new to this and I’m curious on what my first step should be? What has worked for you? Any other suggestions you have, or information that could be useful is appreciated!
As of now I have done nothing to my car, I haven’t even tinted the windows and it only has 10,000km (6,200 miles).

 

[ralph_venue]

Tints should be the very first 😎

 

[venue1947]

I don't have a picture or video but in 1968 when I moved up to where I live now a guy here had a Mini Minor which is probably smaller then a Venue, but he put a Chrysler 426 Hemi in it and because of the room the engine took he sat in where the backseat was and of course had big tires etc....

Of course I'm just joking for you to do the same, but that Mini was a real attention grabber and very fast.

Pin stripping following some of the car's lines would be good and you could even do stuff with body wraps depending on how much money you want to spend...or change the wheels...before I actually saw the wheels that come with the Ultimate I wasn't to fond of them, but once I got my 2022 Ultimate Denim I really like them now.

 

[Chicago Jake]

I am both cheap and lazy, so don't go much for modifications. But I did install my little friend right away. I call him Headly.

 

[justin1138]

Beautiful Stellar Silver Venue. As someone above said, some pinstriping might be cool to set it off if you like that particular look which I do. Also, the vinyl wrap might be cool -- maybe something with the Hyundai logo or VENUE.

Black pinstriping combined with perhaps blacking out the rooms would look great on a silver car. I wouldn't do both the wrap and the pin striping. Just one or the other.

Also if you carry stuff at all atop your Venue, I'd get the cross bars, so your top sheet metal is protected, and it'd make it easier to carry items up there. You can buy aftermarket ones for about $100. I think OEM Hyundai ones are $250.

And you can buy for about $15, a really cool organizer for the armrest storage box. It goes on top and will hold small items like pocket knife, multi-tool, change, wallet, gum, etc., so it's not all lost in the large crevice below.

https://www.amazon.com/SKTU-Compati...ai%20venue%20armrest%20storage,aps,151&sr=8-1

And of course, I'd keep a 12V air compressor in the trunk to air up the tires. Also, a Princess Auto sourced 60 CM long breaker bar with a 19mm impact socket on it, so you can easily remove the lugs to change a flat. This stuff and much more will fit in the spare tire recess compartment. And blankets, water, energy bars,

 

[106DeltaDart]

Tints should be the very first 😎


View attachment 1737
[/Quot
I noticed you have body side moldings on your doors and it looks very nice! Can I ask you where you got them? I want to install them on my Venue but the problem I have seen is they aren't thick enough to give any protection. Thanks!

 

[ralph_venue]

I think I bought it here.
I forgot. LOL

Hyundai Venue Painted Body Side Molding 2020 - 2023 / FE-VENUE20 | Sportwing

 

[106DeltaDart]

I think I bought it here.
I forgot. LOL

Hyundai Venue Painted Body Side Molding 2020 - 2023 / FE-VENUE20 | Sportwing



View attachment 1766

Do you think that they are thick enough to give you pretty good protection from other car doors?

 

[jimbalt429]

Hi everyone, this is my new 2022 Venue Ultimate, I got it in June of 2022. I’m new to this community and I do have a lot to look through, but I’m looking for recommendations from other Venue drivers on any sort of modifications (aesthetic, or performance). I’m very new to this and I’m curious on what my first step should be? What has worked for you? Any other suggestions you have, or information that could be useful is appreciated!
As of now I have done nothing to my car, I haven’t even tinted the windows and it only has 10,000km (6,200 miles). View attachment 1736

I put the factory mud flaps on mine. Very easy to install and help keep it clean.

 

[106DeltaDart]

I put the factory mud flaps on mine. Very easy to install and help keep it clean.

I want to install these as well. Did you buy them from the dealer or some other place? Thanks!

 

[jimbalt429]

I want to install these as well. Did you buy them from the dealer or some other place? Thanks!

Hyundai website

 

[venue1947]

Hyundai website

they're good to have...the dealer installed them before I picked up my Venue and they recommend them on all their vehicles that don't have them from the factory