Hyundai Venue Forum banner
1 - 7 of 7 Posts

Registered
Joined
10 Posts
Discussion Starter · #1 ·
Why? Because it needed more up. 2.5/3inch
Told ya it was coming! 馃
Wheel Tire Car Sky Vehicle

Rear spring spacer and front coil strut spring spacer.
Tire Wheel Vehicle Automotive tire Tread

Tire Automotive tire Tread Synthetic rubber Camera lens

Vehicle Automotive fuel system Automotive tire Carbon Automotive design

Tire Wheel Vehicle Car Automotive tire

Measurements to come soon. Currently sitting taller than 21my Tucson.
Front camber moved positive by +0.5degrees. See below. Will need to figure out a way to make front camber adjustable.
White Product Font Line Parallel

All that's next are wheels/tires. Let me know if you guys want any info.
Very thankful to AutoDVC out of Russia being the only ones willing to make the spacers.
 

Registered
Joined
10 Posts
Discussion Starter · #5 · (Edited)
Definitely going to need a camber adjustment.
Should look hot with a new set under it.
Something chunky to consider鈥
View attachment 915
Link? NVM Avid Av6. I might actually go for these if the numbers make what I'm after because that white and chunky spokes would pop. Before wheels/tires gotta mod the wheel well liner and make sure there's no steel for the wheels to catch on while rolling/turning.
 

Registered
Joined
1 Posts
Why? Because it needed more up. 2.5/3inch
Told ya it was coming! 馃
View attachment 909
Rear spring spacer and front coil strut spring spacer. View attachment 910
View attachment 911
View attachment 912
View attachment 914
Measurements to come soon. Currently sitting taller than 21my Tucson.
Front camber moved positive by +0.5degrees. See below. Will need to figure out a way to make front camber adjustable.

Can you please provide a part number for the kit? Thank you.
 

Registered
2021 green apple SEL
Joined
35 Posts
Why? Because it needed more up. 2.5/3inch
Told ya it was coming! 馃
View attachment 909
Rear spring spacer and front coil strut spring spacer. View attachment 910
View attachment 911
View attachment 912
View attachment 914
Measurements to come soon. Currently sitting taller than 21my Tucson.
Front camber moved positive by +0.5degrees. See below. Will need to figure out a way to make front camber adjustable.
View attachment 913
All that's next are wheels/tires. Let me know if you guys want any info.
Very thankful to AutoDVC out of Russia being the only ones willing to make the spacers.
Ok now I want to do this.
 
1 - 7 of 7 Posts
Top